Specification: LK-FCM-R 25/30，LK-FCM-R 1，1/4’’，LK-FCM-R 35/40，LK-FCM-R 37/42 L，LK-FCM-R 45/50
Category:
Keywords:
- 产品描述
LK-FCM-R Grating fastener disc(stainless steel)
-
- Commodity name: LK-FCM-R Grating fastener disc(stainless steel)
- 品号: 3001001，3001002，3001003，3001004，3001005
- 规格型号: LK-FCM-R 25/30，LK-FCM-R 1，1/4’’，LK-FCM-R 35/40，LK-FCM-R 37/42 L，LK-FCM-R 45/50
- 材质: S31803/1.4462/2205/SS316L
- 基材厚度/高度: Height: 25-30，29-32，35-40，37-42，45-50
- 包装: 100
Stainless steel grating fastener disc for fixingfloor grates with threaded studs in highlycorrosive environments
Product No. Specification Height(mm) Material Package 3001001 LK-FCM-R 25/30 25-30 S31803/1.4462/2205/SS316L 100 3001002 LK-FCM-R 1，1/4” 29-32 S31803/1.4462/2205/SS316L 100 3001003 LK-FCM-R 35/40 35-40 S31803/1.4462/2205/SS316L 100 3001004 LK-FCM-R 37/42 L 37-42 S31803/1.4462/2205/SS316L 100 3001005 LK-FCM-R 45/50 45-50 S31803/1.4462/2205/SS316L 100 
Technical Data
Application： Grating fastening Minimum thickness of base material (steel)： 6mm Corrosion protection： duplex stainless steel,Stainless steel 316L,or equivalent， Environmental Conditions： Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor,Marine environment, areas with heavy industrial pollution Material： S31803/1.4462/2205/SS316L Product Features
1. Labor-saving grating installation – fewer steps than traditional grating clamps and welding
2. Approvals and certificates – technical data, test reports and approvals available
3. No surface rework needed – when fastening grating to steel with LKS-BT and LKX-BT threaded studs
4. Durable hold – locking tabs on the disc help to prevent loosening or spinning
5. Reduce trip hazards – non-slip surface and minimized protrusion on walkway gratings when correctly installed
Applications
1. Fastening grating to steel in highly corrosive C5 environments, such as ships or offshore oil and gas installations
2. For gratings exposed to standard loads such as walkways
3. Fastening steel grating
4. Fastening fiber-reinforced plastic (FRP) grating
5. Grating fastener disc for use with M8 threaded studs
Installation Steps
LKX-BT-GR Flat Head Stud LK-FCM-R Grating Disc System LK-FCS-R Grating Multi-Directional Clip System
1
Use a high speed electric drill and the special drill bit to drill on the steel base material.
2
Use the special nail gun to shoot the flat head threaded stud (LKX-BT-GR-M8) into the holes.
3
Use an electric driver to fix the grating disc (LK-FCM-R) or the stainless steel multi-directional clip (LK-FCS-R) on the exterior threads of the LKX-BT-GR-M8 flat head stud until the steel grating is fastened and the fastening torque is reached.
LK-GF Spike Nail LK-FCM-F Grating Disc System LK-MGF Grating M Type System
Use a special nail gun (powder-actuated) to shoot the threaded spike nail (LK-GF-M8) into the base material.
Use an electric driver to fix the grating disc (LK-FCM-R) on the exterior threads of LK-GF stud until the steel grating is fastened and the fastening torque is reached.
Grating Fastening
Installation of threaded spike nail
Installation of fastener discs
Related Products
Products Inquiry